CondorShell
  • What is CondorShell?
  • Documentation
    • Installation Instructions
      • How to Install CondorShell free limited version
      • How to install CondorShell full version
    • General
      • Attach to Instance
      • New Instance
    • Define
      • Define Concrete Material
      • Define Steel Material
      • Define Rebar Material
      • Define Frame Beam
      • Define Frame Column
      • Frame Property Modifiers
      • Define Filled Deck
      • Define Ribbed Slab
      • Define Slab
      • Define Solid Slab Deck
      • Define Unfilled Deck
      • Define Waffle Slab
      • Define Wall
      • Area Property Modifiers
      • Define Point Spring
      • Define Group
    • Draw
      • Draw Beam
      • Draw Floor
      • Draw Column
      • Draw Grid
      • Draw Design Strips
      • Draw Tendons
      • Draw Points
    • Select
      • Element Name
      • Select Area
      • Select Frame
      • Select Point
    • Assign
      • Assign Frame Section
      • Assign Joint Restraint
        • Fast Restraints
        • General Restraint
        • Fix Support
        • Pin Support
        • Roller Support
        • Unsupported
      • Assign Frame Release/Partial Fixity
        • Frame Releases
        • Frame Partial Fixity Springs
      • Local Axis
      • Insertion Point
        • Offset End Insertion Point
      • End Length Offsets
      • Assign Area Section
      • Joint Load Force
        • Point Force Load
      • Joint Load Ground Displacement
        • Ground Displacement Load
      • Distributed Frame Load
      • Frame Load Point
      • Uniform Shell Load
      • Assign to Group
Powered by GitBook
On this page
  1. Documentation
  2. Define

Define Solid Slab Deck

PreviousDefine SlabNextDefine Unfilled Deck

Last updated 3 years ago

Defines a filled deck

Execute: Executes the operation.

CSI Model: CSI Safe model attached to Grasshopper.

Units: Units to define the section property.

Section Name: Name of section.

Material Property: Name of material property to be assign to the section.

Slab Depth: Depth of the slab.

Shear Stud Diameter: Diameter of shear stud.

Shear Stud Height: Height of shear stud.

Shear Stud Fu: Shear stud tensile strength.

Area Modifiers: Property/Stiffness modifiers for analysis.

Warning: If a material property name does not exist in the model the component will give you an error.

Warning: Due to API limitations the material property assigned in the parameter "Material Name" is ignored. The material property for the solid slab deck will be created with a default material. We recommend the user to modify the material in the programs manually until the API limitation is corrected.

Video

Define solid slab deck
Define solid slab deck